UEFI0028：iDRAC is not responding after，a recovery system reset was performed remove input power from the  system wait for 30 seconds and re-apply input power turn on the system 

controller venHw EBFC-488E-B110-662867ABCDEF2

swc0700 idrac is not readu the configuration values cannot be accessed.

uefi0029 unable to initialize idrac because of some critical issues

do one of the following 1 remove inout power from the system wait for 30 seconds and re-apply input 

power turn on the system 2 update the idrac firmware 3 continue to boot,note this mayresult in unexpected power loss remote out of band access active power management thermal mangement inventory ollection lcd or system error reporting

UEFI0028:iDRAC在之后没有响应，执行恢复系统重置，从系统中删除输入电源等待30秒，然后重新应用系统的输入电源打开

控制器venHw EBFC-488E-B110-662867ABCD EF2

swc0700 idrac未读取配置值无法访问。

uefi0029由于某些关键问题无法初始化idrac

执行以下操作之一1从系统中卸下输入电源等待30秒，然后重新应用输入

电源打开系统2更新idrac固件3继续启动，注意这可能导致意外的电源丢失远程带外访问活动电源管理热管理库存集合lcd或系统错误报告